How Would You Realize Whether 120mm cpu fan Fulfill Your High Standards?
When selecting a suitable 120mm cpu fan, a variety of factors have been found. Information sources are available in a wide range of forms. As a basis, we are doing it to support, inform, and solve your demands.
The decider will feature some of the essential items on the market and address some of the most common questions:
- What factors should you examine when determining the best matches your demands?
- What are the benefits of purchasing the item?
- Where should you start to ask for support for the impact lines of this product?
- Why does it matter whether the product is suitable?
- Where is the reliable place to send the request?
Cos of the widespread utilization of sales websites and forums, 120mm cpu fan are still one of the most relevant and essential sources of information available on the Internet today.
Both people and technology were created and appraised. A more in-depth evaluation of these aspects would be beneficial. Keep these things in mind.
Aesthetics
You can customize case fans to make your computer look better with RGB lighting or color rings. Fans are a function that will last longer. We tend to prioritize their functionality.
Fans Type
First, you need to decide whether you prefer a fan that has high static pressure over a fan that is more efficient with airflow. The fan blade's shape will determine this. Yes, that's right. The fan shape and design can be identical, but the fan blades will vary.
It doesn't take long to read the specifications to determine if the fan has either an Airflow or static pressure type.
Take a look at your fan's face, and measure the distance between fan blades. It's likely to be a static pressure type if the distance between blades is too small. It's an Airflow fan if the distance between blades is too large for your index fingers to pass through.
Durability
Consider the material used in making the case fan. A case fan made from the finest materials will perform and last longer.
Bearing Type
These are the three most common types of bearings used today in case fans.
- Sleeve Bearings: These bearings are the most affordable and can be used for around 40,000 hours at 60degC (140degF).
- Double ball bearing: Although the double bearing is more costly than sleeves bearings, they last much longer. They can run for 60 to 70 percent of their normal operating temperature (140°F) and will last up to 60,000 to 75,000 hour.
Fluid Dynamic Bearing, Hydrodynamic Bearing are premium bearings. These bearings are the most durable and can last up to 100,000-300,000 hours when operated at 60 degrees Celsius (140 degrees F).
Size
There are many sizes of fans, but the most common ones are 120mm or 140mm. To determine which mounts you can use to install your computer fan, measure the case (or consult manuals). Some mounts are 140mm in diameter, while others have holes that can hold 120mm fans. It all depends on the design of your case.
Power Connectors
Three types of fan power connectors are available:
- 4-pin connectors: you can control your fan using SpeedFan or third-party software.
- Only the voltage can be changed in the BIOS to adjust 3-pin connectors. This feature is not supported by all motherboards.
Low voltage can cause problems, or even stop the fan from running. This is why it's important to be clear about what you are doing.
- MOLEX connectors are designed to run at maximum speed and can not be adjusted.
Compatibility is affected by connector types so make sure to check the type of your motherboard before you buy.
Speed (RPMs)
RPM is the revolutions per minute (revolutions per minute) that a fan runs at. Air is drawn into the fan's system at a higher RPM. The fan's noise level is directly affected by the RPM. A fan spins faster, so the higher the RPM.
You might need to consider the dimensions of your fan. A fan that is small can be used at high speeds, but it won't be as loud. Instead, you could use a bigger fan with a slower speed.
You can adjust the RPM to suit your set-up by setting the fans up at maximum speed using third party software such as SpeedFan. Once the fan stops being too loud, the temperature is acceptable and the fan cools down, you can drop the speed 25%.
LED Lighting
While LED lighting may not be an essential aspect of case fans, it can make your case stand out. Numerous models have LED lighting. Some models let you control the color changing depending on which model you choose.
Intake/Exhaust
You will have to decide whether the fans are going to be intake or exhaust when installing them in your case.
You should aim to have one intake and one exit, but you don't need to worry too much about this ratio.
Noise
You should be looking at the decibels (or dBA) produced by silent fans if you are looking for quiet case fans. Fans that are quieter than others will generally run at a lower RPM, and have a lower level of performance.
CFM (Cubic Feet Per Minute)
What is CFM, you ask? CFM, or cubic feet per hour, is the measurement of a fan’s airflow. The fan's airflow is measured in cubic feet per minute.
The higher CFM rating is generally better. Static pressure may be less efficient if there are hardware obstacles.
Because there are many factors to consider, the ideal CFM of a computer can vary from one case to another. Consider factors such as the size of the case, its design, heat output, type and number of GPU fans, whether they are open-air or blower, as well the case's overall dimensions.